Operate the complete workstation
Use these guides from first receiver connection through array scanning, raw IQ capture, remote radios, live decoding, recording, and network output.
Getting started
Install, choose hardware or simulation, build the first array, and confirm live data.
02Receiver setup
Bind WinUSB safely, assign stable receiver identities, and plan multi-radio USB capacity.
03Workstation controls
Tune, link, sweep, focus, combine, and display every receiver from one workspace.
04Frequency Manager and scanner
Import channel lists, run one-radio or full-array scans, use priority channels, and review hits.
05IQ and remote receivers
Capture and replay SigMF baseband or add network radios through rtl_tcp.
06Network output and rigctl
Serve ADS-B data, stream audio to Icecast, and expose standard radio control.
07Decoder and signal intelligence
Run built-in and supported live-engine decoders, Pattern Hunter, Search Director, and Skywatch.
08Array and Rosebud
Map antenna roles and bearings, compare receivers, and annotate a second-screen view.
09Recording and alerts
Record synchronized evidence, configure alert classes, review events, and export reports.
10ADS-B aircraft
Run 1090 MHz monitoring, operate the map, configure emergency alerts, and enable SBS output.
11Imaging integration
Configure the optional local event handoff between two separate applications.
12Licensing
Activate a permanent SDR license, bundle key, replacement key, or demo.
13Troubleshooting
Resolve receiver, scan, playback, network-output, audio, recording, and activation issues.